Aerial work platform and construction machinery rental in Povazska Bystrica

In Povazska Bystrica, aerial work platforms and construction machinery are mainly needed for steel — for hall structures, crane runways, pipe routes and plant components that are installed, extended or repaired. The city is a centre of metalworking and mechanical engineering with a strong automotive share, and that shapes every enquiry: it is not the working height that decides but the weight that has to go up. Two fitters with a welding unit and gas cylinders quickly reach the limit of what a boom basket can carry.

For assembly and repair work on steel components, the permissible basket load is the first selection criterion, not the last. The highest-capacity class in the rental fleet is diesel scissor lifts with up to 1,134 kg — enough for personnel, equipment and material to arrive at the top in one lift. On unpaved factory yards the four-wheel-drive version plays to its strengths.

In the hall, where exhaust fumes are ruled out, electric scissor lifts with up to 1,000 kg basket load take over. For external structures, pipe bridges and headframes that the machine cannot drive directly beneath, articulating boom lifts are the right class — although basket load here is considerably lower and falls as the boom extends. For great heights on chimneys, silos and towers, telescopic boom lifts up to 56.90 m are available.

Hot work brings its own requirements: flying sparks, fire watch, protection of the machine and the areas below. Let us know whether welding will take place in the basket — machine selection and equipment depend on it.

In steel construction and crane installation, the lifting equipment itself is in question: the crane is precisely the component being worked on, and a mobile crane is disproportionate for lifts on a daily basis. The usual answer is a combination of an aerial work platform for positioning people and a telehandler for the material.

Fixed models lift 4.30 to 18.80 m at 1.25 to 25 t and also handle heavy assemblies. Roto telehandlers reach 15.42 to 38.90 m and lift all round from a single set-up — decisive when a hall bay is accessible only via one free area. Inside buildings the electric version works; forks, load hooks and work basket mounts are added as attachments.

In narrow warehouse aisles, high-rack scissor lifts do the work; for inspection rounds in workshop and office wings a mast lift is sufficient.

The second topic is conversion of existing buildings. The factory areas have grown over decades and are densely built up; the valley allows hardly any lateral expansion: halls adjoin one another, with narrow driveways between them and pipe bridges and rail sidings above.

For scheduling this means three things. The clearance height under pipe bridges and crane runways often limits which machine can reach the work location — measure it before you specify the working height. In confined yards, a machine with outriggers all round may block the only access; here narrow scissor lifts have the advantage. Where set-up areas are soft or have basements below, spider lifts with low ground pressure come into play.

For demolition and foundation work, excavators from 1.8 to 30 t complete the range. For in-plant transport, forklifts from 3 to 16 t are available, as heavy-duty forklifts for heavy assemblies, plus high-lift pallet trucks up to 5.50 m lift height. The rest of the earthmoving and civil engineering fleet can be found under construction machinery.

In a company that builds lifting equipment itself, the system is familiar — even so, it is worth looking at how the rental machine is classified. Decree MPSVR SR No. 508/2009 Coll. lists a pojazdna pracovna plosina (mobile work platform) with motor drive and a lift height above 1.5 m as zdvihacie technicke zariadenie skupiny A (group A lifting equipment); it is therefore a designated technical device for which official tests are prescribed — uradne skusky and, at recurring intervals, opakovane uradne skusky — as well as formal requirements for operator qualification. In addition, Government Regulation No. 392/2006 Coll., Act No. 124/2006 Coll. and the test standard STN EN 280 apply.

We supply the inspection record, CE documentation and operating manual with every machine; risk assessment, proof of qualification and instruction at the work location remain with the hirer. For work on steel structures, the points arising from the activity are added: hot work permit and fire watch, fall protection at the boom end, securing the area below the workplace and coordination with crane operations. The visual and function check before work starts cannot be shifted to the rental company.

We deliver the machines by low-loader to your site — delivery throughout Slovakia. We schedule with our own low-loaders and partner hauliers and coordinate the date with your assembly planning.

For factory sites we need the delivery point, access width and height and permissible axle load in advance — on densely built-up sites the last alley is regularly the bottleneck. For requirements of several months, long-term rental rates apply; we price the platform, telehandler and attachments as a package. Further locations in the valley, for example towards Trencin, can be included in the same run.

Aerial work platform rental → | Request a quote →

Which design suits your job? The overview Lifting platform rental – all platform types at a glance explains scissor, articulating boom, telescopic boom, mast, spider and truck-mounted platforms and shows what the rental price depends on.