Aerial work platform and construction machinery rental in Martin

Aerial work platform and construction machinery rental in Martin

Aerial work platforms and construction machinery for Martin in Slovakia are mostly requested for buildings in which people are cared for or parts are manufactured - neither tolerates interruption. The city in the Zilina region rests on two pillars: the university hospital and a well-established machinery and component manufacturing sector. Anyone planning access equipment here should expect time windows, hygiene requirements and routes via lifts rather than an open site.

Image of a rental machine of type VAS-600 | Uplifter vacuum lifter UPG600

VAS-600 | Uplifter vacuum lifter UPG600

Image of a rental machine of type SBE-079 | Genie GS 2032

SBE-079 | Genie GS 2032

Working height
7,90 m
Lifting capacity
363 kg
Platform size
(3,18 m) x 2,26 m x 0,81 m
Drive unit
Electric
Image of a rental machine of type KTB-300 | Teupen LEO30T

KTB-300 | Teupen LEO30T

Working height
30,00 m
Lifting capacity
200 kg
Lateral reach
15,70 m
Drive unit
Bi-Energy
Image of a rental machine of type GTH-160 | Genie Z45FE

GTH-160 | Genie Z45FE

Working height
15,92 m
Lifting capacity
300 kg
Lateral reach
6,94 m
Drive unit
Hybrid

Working while the hospital is in full operation

A hospital cannot be switched off. Renovation of ventilation runs, medical gas pipelines and suspended ceilings therefore takes place section by section, often at night or on individual weekends, always alongside normal operation.

This dictates a clear choice of equipment. Combustion engines are ruled out inside the building; only electric scissor lifts are an option. In ward and treatment wings, what matters is not metres but machine width, turning circle and non-marking tyres on seamless flooring.

If the route leads via a bed lift, the permissible transport weight becomes the toughest criterion. In that case, mast lifts are often the only practical class: light, narrow enough for standard doors and movable by one person. In atriums and plant rooms with a large clear height, electric articulating boom lifts work up and over installations without the area having to be cleared.

Also plan for dust protection and coordination with the infection control officer. We provide machines for hospital use cleaned and agree the delivery point so that no travel through sensitive areas is required.

Facade, roof and outdoor areas of the hospital campus

Different rules apply outside. For facade renovation, rooftop structures and dry coolers, you need reach over canopies, emergency access routes and green areas - which is what articulating boom lifts are made for, with four-wheel drive even on unpaved ground. If an emergency access route has to remain clear - almost always the case on hospital grounds - the short set-up time of a boom lift beats a scaffolding solution. On sensitive surfaces, spider lifts work with low ground pressure; for tall building sections, telescopic boom lifts up to 56.90 m are available.

The rental fleet in figures

ClassWorking heightBasket load
Scissor lifts electric6.30 – 33.00 m227 – 1,000 kg
Scissor lifts diesel9.70 – 34.00 m363 – 1,134 kg
High-rack scissor lifts18.50 – 33.00 m450 – 1,000 kg
Articulating boom lifts10.89 – 48.15 m150 – 450 kg
Telescopic boom lifts14.00 – 56.90 m227 – 454 kg
Mast lifts10.00 – 12.65 m200 kg
Spider lifts13.00 – 39.50 m200 – 400 kg

Mechanical engineering and component manufacturing: height under the crane

The second focus in Martin is production halls in which the crane system determines the geometry: work takes place below the crane runway without shutting the crane down for long, and the usable height ends at the trolley. For maintenance of lighting, extraction and service lines below the ceiling, electric scissor lifts are the standard, in high-bay areas high-rack scissor lifts with a narrow track; in factory yards, diesel scissor lifts take on the highest basket load of up to 1,134 kg. Tie the rental period to the planned plant shutdown, not to the calendar month.

Telehandlers, excavators and forklifts for Martin (Zilina)

Telehandlers move material to where setting up a crane would be disproportionate: fixed models lift to 4.30 to 18.80 m at 1.25 to 25 t, roto telehandlers reach 15.42 to 38.90 m and serve several unloading points from one set-up - useful where escape routes must remain clear. Inside buildings, the electric version works without local emissions.

For earthworks and interior demolition, excavators from 1.8 to 30 t operating weight are available. We also supply forklifts from 3 to 16 t, with electric drive for indoor use, as well as high-lift pallet trucks with up to 5.50 m lift height. The rest of the earthmoving fleet is listed under construction machinery.

Lifting technical equipment: inspection obligations before first use

In sensitive buildings, the first question before work is approved is which records are available - and Slovak requirements go beyond a visual check. Decree No. 508/2009 Coll. classifies a self-propelled aerial work platform with motor drive and more than 1.5 m lift height as group A lifting technical equipment; this makes it designated technical equipment, subject to official tests (initial and recurring official tests) and special qualification requirements. In addition, Government Regulation No. 392/2006 Coll., Act No. 124/2006 Coll. and the test standard STN EN 280 apply.

The roles are clearly separated. We deliver every machine with a valid inspection record, CE documentation and operating manual and keep inspection intervals and maintenance history for the entire rental fleet. The risk assessment, proof of competence and briefing on site lie with the hirer. In a hospital environment, there are additional operational requirements that the law does not prescribe but the facility operator demands: work permits, escort by building services, rules for escape routes and fire alarm systems. Regardless of this, the visual and functional check before starting work is the operator's duty.

Transport to Martin

We deliver throughout Slovakia - by low-loader directly to your site. For night and weekend jobs, we plan delivery so that the machine is ready before the window starts and the operator briefing can take place.

For hospital and factory sites, we need the delivery point, access width and permissible axle load in advance. Long-term rental rates apply from several months; we invoice platform and telehandler as a package.

Aerial work platform rental → | Request a quote →

Which design suits your job? The overview Lifting platform rental – all platform types at a glance explains scissor, articulating boom, telescopic boom, mast, spider and truck-mounted platforms and shows what the rental price depends on.

FAQ: Martin

chevronDown

Which aerial work platform is suitable for maintenance during ongoing hospital operations?

Exclusively electrically powered machines. On wards, in functional wings and corridors, electric scissor lifts are the standard; if access is via lifts or standard doors, a mast lift is often the only machine that gets there at all. Pay attention to non-marking tyres, low floor load and make sure the machine is cleaned before it is brought in.

How does a platform get to an upper floor if there is no goods lift?

Then the permissible transport weight of the lift decides, and often only the lightest class remains. Measure the car dimensions, door width, threshold height and load capacity and give us the values with your enquiry. If the route via the lift is ruled out, installation through a facade opening remains - to be decided early.

May an aerial work platform be used underneath an overhead crane?

Yes, provided the work area is secured organisationally. It is usual to lock out the crane for the hall section concerned or to set limit switches so that the trolley and basket cannot meet. Also note that the usable working height ends at the underside of the crane runway, not at the roof structure.

How far in advance should machines be scheduled for a plant shutdown?

The earlier, the better - during a shutdown several trades work at the same time, and the machine class must be settled by then. Tell us the start and end of the window, the working height required and the number of people in the basket. We align delivery and collection with this by arrangement; we do not give fixed time commitments for individual trips.

What does classification as designated technical equipment mean for my job in Martin?

It means that under Slovak law the platform counts as specially supervised lifting equipment and is subject to official inspections, with corresponding documentation and formal requirements for operator qualification. We bring the inspection records for the machine; the risk assessment, proof of qualification and instruction remain with the contractor. In hospital and plant environments, the operator also requires its own permits.