Hybrid scissor lift rental from Luibl Rental

A hybrid scissor lift solves a problem that occurs constantly in day-to-day projects: the machine has to cross unpaved terrain to reach its place of use and then work in an enclosed hall where exhaust fumes and noise are not permitted. Renting two machines for this means paying for two transports and two rental items. The Luibl rental fleet includes four scissor lifts with switchable drive – working heights from 11.75 m to 27.20 m, load capacities from 363 kg to 1,000 kg. All machines are inspected before handover in line with the inspection and test intervals for designated lifting equipment (Decree No. 508/2009 Coll.) and EN 280.

Two drive concepts are behind the term:

• Bi-energy: A diesel generator charges the battery and handles travel on rough terrain; for lifting and driving indoors, the machine switches to pure battery operation. The diesel engine stays off.

• Hybrid: Diesel and electric drives are permanently combined; the control system selects the operating mode according to load or by operator preselection. Typical of heavy rough-terrain scissor lifts with four-wheel drive.

In practice, both mean the same thing: one machine, two working environments, one transport.

The heavy-duty class: 27 m working height with 1,000 kg

The Holland Lift M250HYL25 Combistar 4WD is the only machine in the rental fleet that combines 27.20 m working height, 1,000 kg platform capacity and four-wheel drive with a switchable drive concept. The platform can be extended to 8.25 m – the basic requirement when facade elements, ventilation ducts or sandwich panels are to be handled in one lift without repositioning the machine. Typical applications: facade installation on multi-storey logistics halls, steel construction in plant engineering, roofing work followed by interior fit-out.

The mid-range class: 12 m to 15 m for alternating operation

The three bi-energy machines cover the range in which most alternating projects fall – commercial construction, hall renovation, ventilation and sprinkler installation on sites that do not yet have a reliable mains connection.

• PB S151-19EGI 4x4 – 15.00 m working height, 500 kg load capacity, platform extendable to 6.36 m, four-wheel drive. The strongest of the three when material has to go up on the platform too.

• Genie GS 4069DC – 14.12 m working height, 363 kg load capacity, compact base dimensions of 2.79 m × 1.60 m. Fits through site gates that are too narrow for the larger rough-terrain scissor lifts.

• Genie GS 3369BE – 11.75 m working height, 454 kg load capacity, identical base dimensions to the GS 4069DC with higher load capacity. The choice for two-person installations with tools.

The switching capability comes with a rental surcharge compared with a purely electric scissor lift of the same working height. It pays off as soon as one of these four points applies:

1. No reliable mains connection on site. On shell construction sites, site power is usually already allocated. Anyone using an electric scissor lift without secure overnight charging loses working time on the second day. The diesel generator charges independently of the grid.

2. The machine has to cross rough terrain to reach its position. Topsoil, gravel, sloping site access roads: electric scissor lifts with non-marking tyres are not designed for this. The hybrid machines in the fleet have four-wheel drive.

3. Indoor and outdoor use alternate during the project. Facade first, interior fit-out afterwards – classic in commercial and logistics construction. A machine change means two transports, two briefings and a gap in the construction schedule.

4. Emission requirements indoors. In food plants, clean rooms and operational logistics facilities, diesel operation is ruled out. Pure battery operation meets the requirements for work without local emissions, without losing the rough-terrain capability for the journey there.

If none of the points applies, the pure electric scissor lift or the diesel scissor lift is the more economical choice.

Switching at a standstill, not under load. The operating mode is changed with the machine stationary via the ground controls or – depending on the model – via the platform controls. Switching during lifting is not intended by design. For deployment planning, this means: the operating mode is selected before setting up, not during work.

Battery capacity determines indoor operating time. In pure electric mode, the operating time is limited by the battery. As a planning figure, assume one working day on a full charge with a normal lifting and driving profile. For multi-shift indoor operation, either a charging break must be scheduled or the generator used for recharging outside the emission-sensitive area.

Check the tyre choice. Rough-terrain capability and non-marking properties are two separate requirements. If the machine continues working on a coated hall floor after outdoor use, the tyres must be explicitly clarified in the enquiry – please state this in your enquiry text.

Weight and wheel load. Switchable machines carry both a generator unit and a battery pack. Their total weight is higher than that of a purely electric scissor lift with the same working height. For work on slabs in underground car parks or on upper floors, the wheel load of the specific model is decisive, not the total weight – we provide the data sheets before the rental starts.

Outriggers and ground slope. The rough-terrain models level themselves using hydraulic outriggers. The permissible ground slope during operation is model-specific and documented in the data sheet; the tilt sensor cuts out the lift function if it is exceeded.

Every scissor lift from the Luibl rental fleet undergoes inspections and tests of technical equipment (Decree No. 508/2009 Coll.) and is checked by our workshop staff before every delivery. Standard equipment includes a tilt alarm, overload protection, a mechanical emergency lowering system and emergency lowering from the ground on both sides. For operation, the following still applies: operators must hold a written confirmation of verified expertise issued by a certified inspection technician (Section 17(3) Decree No. 508/2009 Coll.), and for work at height under Government Regulation No. 147/2013 Coll. personal fall protection equipment is used on the platform. We provide an operator briefing on handover. Switchable operation adds two points: * The briefing must cover both operating modes – in practice, operating errors occur mainly when switching. * If the diesel generator is run in enclosed spaces, ventilation requirements apply in line with applicable Slovak safety rules. This is exactly what electric operation is meant to avoid; the operator's work instructions should state this clearly. Transport is handled by our own low-loader fleet, with delivery throughout Slovakia and to all other Luibl markets: Germany, Austria, Switzerland, Poland, Czechia, Italy, Hungary, Luxembourg. For long-term rentals we offer package deals including inspections and tests and annual maintenance during the rental period.

Do you know which working height and operating mode you need? Send us the working height, load capacity, site location, rental period and – if relevant – the tyres required. We will get back to you promptly with a quote and availability.

Send your enquiry now → luibl.eu/kontakt/ · 00800 2000 3000 (toll-free)