
Manitou rental: telehandlers, forklifts and aerial work platforms from one rental fleet
At Luibl Rental you rent Manitou machines for almost every lifting task on site: fixed, roto and heavy-duty telehandlers, an electric telehandler, forklifts and rough-terrain forklifts as well as aerial work platforms. The telehandlers cover 4.30 to 34.70 m lift height and 1,250 to 33,000 kg load capacity.
Three questions decide which machine is right: how high and how far does the load have to go, how heavy is it at that point, and how much space does the site offer? This page sorts the Manitou series by exactly these criteria and leads you to the matching model overview.
Four telehandler types: which Manitou series suits your job
Manitou builds its telehandlers in clearly separated series. Lift height, load at the placement point and working environment decide your choice.
- Fixed telehandlers (ULM and MT): The boom only lifts forwards. In the rental fleet from 4.30 m lift height and 1,250 kg load capacity (ULM 412) to 17.55 m and 4,000 kg (MT 1840). The choice for material handling, pallets and supplying upper floors. → Fixed Manitou telehandlers
- Rotating Telehandlers (MRT): The superstructure rotates through 360 degrees while the chassis stays on its outriggers. Ten models with 17.90 to 34.70 m lift height and 4,000 to 7,000 kg load capacity. The choice for many load points in a confined space and for crane and basket work. → Manitou Roto rental
- Heavy-Duty Telehandlers (MHT): Five models from 12,000 kg (MHT 10120) to 33,000 kg load capacity (MHT 12330) at 9.60 to 11.92 m lift height. For steel construction, precast elements and industrial installation. → Heavy-Duty Telehandlers
- Electric telehandlers: The Manitou MT 625e lifts 2,500 kg to 5.85 m and works without local emissions, for example in halls and city centres. → Electric telehandlers
For Manitou telehandlers, the load chart decides, not the rated load capacity
The load capacity in the data sheet only applies with the boom retracted, close to the machine. The further the boom extends, the more the permissible load drops. Plan with the load at the most distant placement point.
Clarify three points before your enquiry:
- Load and position: the real weight and the height and outreach at which it is placed. Only this combination determines the model according to the load chart.
- Ground: load-bearing, level or sloping? Tyres, outriggers and load-spreading pads depend on it.
- Access: Gates, passages and bends limit the machine size. The Manitou telehandlers in the rental fleet are 1.49 m (ULM 412) to 2.98 m (MHT 12330) wide.
Manitou forklifts and aerial work platforms complement the telehandlers
Not every task needs a telehandler. For pure handling on firm ground and for work at height without a load, there are more suitable Manitou machines.
- Forklifts: diesel forklifts of the MI series with 3,500 to 10,000 kg load capacity and 4.50 to 6.00 m lift height for yards, warehouses and truck loading. → Forklift rental
- Rough-terrain forklifts: Manitou M30-4 and M50-4 with 3,000 and 5,000 kg load capacity and 4.75 m lift height for unpaved terrain.
- Aerial work platforms: mast lifts, articulating boom lifts and telescopic boom lifts from 9.85 m (VJR 100) to 27.73 m working height (280 TJ), electric or diesel. → Aerial work platform rental
With attachments, the Manitou telehandler becomes a crane or an aerial work platform
A Manitou telehandler changes its job by changing the attachment. Each attachment has its own load chart, which the operator must know before use.
- Forks: lifting pallets and building materials onto floor slabs, scaffolding and roofs or unloading trucks.
- Load hook and winch: The telehandler works as a mobile crane and places loads over obstacles.
- Work basket: With a basket approved for the model, it becomes an aerial work platform, especially the rotating MRT models.
- Bucket: for bulk material in landscaping and earthworks.
Which attachments suit your model is shown in the overview Attachments for telehandlers.
Every Manitou machine needs a qualified operator
In Slovakia, telehandlers, forklifts and aerial work platforms are covered by the occupational safety rules (Act No. 124/2006 Coll.) and Government Regulation No. 392/2006 Coll. (work equipment). The employer also briefs the operator on the specific machine and appoints them to operate it.
- Telehandlers: operator qualification in line with applicable Slovak safety rules and STN EN standards. Rotating machines as well as basket and crane operation each require a matching qualification for that mode.
- Forklifts and rough-terrain forklifts: forklift operator licence under Act No. 124/2006 Coll. and Decree No. 356/2007 Coll.
- Aerial work platforms: written confirmation of verified expertise issued by a certified inspection technician (Section 17(3) Decree No. 508/2009 Coll.).
- Work basket: Personal fall protection equipment is used in the basket under Government Regulation No. 147/2013 Coll. (work at height).
Luibl Rental does not offer training itself but informs you about certified providers. More on the Trainings page.
FAQ: Manitou rental machines

Which Manitou machines can I rent from Luibl Rental?
What is the difference between Manitou MT, MRT and MHT?
How high does the largest Manitou telehandler in the rental fleet lift?
What qualification do I need for a Manitou telehandler?
Can a Manitou telehandler be used as an aerial work platform?
How does a rented Manitou machine get to the site?
Manitou rental: with these details we prepare your quote
The more precise your enquiry, the better our model proposal fits:
- site location and rental period
- machine type or task, for example lifting material, crane work or working at height
- required lift height and the heaviest load with its distance from the machine
- attachments, access and ground conditions at the set-up position
We organise delivery to your site throughout Slovakia. You will promptly receive a quote with model, transport and attachments. Request a Manitou quote now.




