Niftylift aerial work platform rental – maximum reach with minimum weight

Niftylift has specialised in a feature that makes the decisive difference on urban sites, in parks and in sensitive indoor areas: minimum dead weight with maximum working height. Where other aerial work platforms damage the floor, block access widths or make transport a problem, Niftylift provides a technically well-thought-out answer. Luibl provides this specialist equipment for rent – with valid inspections, personal briefing and delivery throughout Slovakia.

Niftylift consistently develops aerial work platforms according to one principle: as light as possible, as powerful as necessary. The result is machines that deliver three advantages at the same time, which often contradict each other with other manufacturers:

Low ground pressure: Niftylift models are among the lightest in their working height class. For floors with limited load capacity – paving slabs, lawns, older hall floor structures – this is not a comfort feature but a technical prerequisite for using the machine at all.

Compact transport dimensions: trailer-mounted platforms of the Nifty series fit on a standard trailer and are towed with a category BE licence. Self-propelled models of the Height Rider series are designed for urban sites with narrow access and limited parking space – transport widths under 1.20 m are standard on several models.

Green Machine / Bi-Energy drive: Niftylift hybrid models combine diesel and electric drive in one system (Bi-Energy). The electric motor handles operation in enclosed spaces, at trade fairs and in emission-sensitive environments – without conversion, without a separate charger for every situation. The diesel engine provides the range for outdoor use. One machine, two environments.

Trailer-mounted platforms of the Nifty series are the most economical solution for projects where mobility and easy transport count. No low-loader required, no special transport – a car with a tow bar and a category BE licence is enough.

Nifty 120T

• Working height: 12 m
• Outreach: up to 6.5 m
• Dead weight: approx. 1,250 kg
• Drive: electric (independent of mains power via on-board battery)
• Application scenario: facade work on residential buildings, lighting installation in car parks, cleaning of glass facades. The low weight allows use on paving slabs without base plates.

Nifty 170T

• Working height: 17 m
• Outreach: up to 8.7 m
• Dead weight: approx. 2,100 kg
• Drive: diesel or Bi-Energy
• Application scenario: for tree care work in a city park with sensitive lawn, the Nifty 170T was used because its low dead weight and wide-extending outriggers prevented damage to roots and lawn – where a heavy articulating boom lift could not have been used.

Both models are equipped with a telescopic upper boom that enables outreach without relocating the machine. The articulating telescopic boom bridges obstacles such as hedges, barriers and fences without repositioning the machine.

The Height Rider series is Niftylift's answer to urban sites and indoor installation: self-propelled, narrow, quiet and with full IPAF classification for professional use.

HR 12 (Height Rider 12)

• Working height: 12 m
• Transport width: 0.99 m
• Dead weight: approx. 1,950 kg
• Drive: electric
• Application scenario: sprinkler system installation in a logistics centre with narrow aisles. The transport width of under 1 m allows entry without dismantling rack sections.

HR 17 (Height Rider 17)

• Working height: 17 m
• Transport width: 1.19 m
• Dead weight: approx. 2,750 kg
• Drive: Bi-Energy (diesel + electric)
• Application scenario: hall roof inspection and ventilation installation alternating between outdoors and indoors. The Bi-Energy drive switches between diesel (driving to the hall) and electric (indoor operation) without conversion.

HR 21 (Height Rider 21)

• Working height: 21 m
• Outreach: up to 12 m
• Drive: Bi-Energy
• Application scenario: facade work on commercial buildings with urban access restrictions. The combination of 21 m working height and a transport width of under 1.5 m makes the machine usable on tight city-centre sites where standard machines cannot get in.

All Height Rider models carry IPAF classification 3b (self-propelled articulating boom lift) – a prerequisite for professional use in line with occupational safety rules (Act No. 124/2006 Coll.).

Yes. Niftylift trailer-mounted platforms can also be collected by yourself, subject to logistics availability. Requirements:

• Category BE licence for trailers up to 3,500 kg gross weight – sufficient for the Nifty 120T and 170T

• Towing vehicle with sufficient towing capacity: the registration certificate must state at least the dead weight of the model as the permitted trailer load

• Approved tow bar and working trailer lights: mandatory for road use

• Briefing: Luibl carries out a documented operator briefing at every handover – including self-collection

For delivery by low-loader from Luibl: delivery throughout Slovakia, dates available at short notice.

SioS stands for Sustained Involuntary Operation Prevention System – an active safety system against unintentional continuous actuation of the controls.

The problem without SioS: in the basket, an operator can unintentionally press the control lever due to entrapment, fainting or loss of balance – the machine keeps moving uncontrolled. SioS detects continuous actuation without active confirmation by the operator and stops the movement automatically.

Practical relevance:

• Tree care work with limited room to move in the basket

• Work in indoor areas with a risk of falling due to obstacles

• Single-person operation without a banksman on the ground

SioS is fitted as standard on all current Niftylift Height Rider models in the Luibl rental fleet. It does not replace IPAF training, but actively reduces the risk in unforeseen situations.

City-centre sites: narrow access, paving slabs with limited load capacity, night work with noise restrictions. Electric drive and low ground pressure meet all three requirements at once.

Landscaping and tree care: lawn, uneven surfaces, root zones. The low dead weight of the Nifty series prevents soil compaction and ground damage – the decisive advantage over heavy diesel articulating lifts.

Facility management and maintenance: sprinklers, ventilation, lighting in production halls and logistics centres. Narrow transport width, electric operation, non-marking tyres – all the prerequisites for indoor use without extra effort.

Event technology and exhibition stand construction: exhibition halls with floor load limits, short set-up times, no exhaust emissions in enclosed spaces. Niftylift models meet the hall regulations of major trade fair companies without special permits.

Facade work: trailer-mounted platforms of the 120T/170T class achieve, with the telescopic upper boom, an outreach that is unusual for this machine class. One set-up point, several work areas – less manoeuvring on tight plots.

Luibl provides Niftylift rental machines with a current inspection record. The rental fleet is young – average machine age under three years – which ensures operational safety and technical availability without unplanned breakdowns.

Delivery to Slovakia, Germany, Austria, Switzerland, Poland, Czechia, Italy, Hungary and other European countries. Prompt delivery dates even for urgent projects.

Request a quote: enter the model, working height, delivery location and rental period directly in the contact form. Expert advice by phone on our toll-free line 00800 2000 3000.